STUDI PERENCANAAN PROTOTIPE SISTEM OTOMASI METERING GARDU INDUK MENGGUNAKAN KONSEP HUMAN MACHINE INTERFACE

Main Article Content

Irwan Heryanto Eryk Slamet Nurhadi

Abstract

This research is studying the automation of substation monitoring system especially in metering equipment. It was aimed to plan and implemented the substation design that monitored with SIMATIC WinCC program. The equipments are PLC, PM-710, SIMATIC WinCC, Movicon, relay, MCB, CT and Transformers. It used 3 phase power supply connected to several load of Resistor (R),Inductor (L), and Capacitor (C). PM-710 was used to measure the outgoing load datas that connected and saved to Personal Computer (PC). The experiment were using the varied load. Base on the module, the power substation simulated with WinCC and the reading metering datas such as real power, apparent power and power factor also frequency by MOVICON that displayed in the PC monitor.

Downloads

Download data is not yet available.

Article Details

How to Cite
ERYK, Irwan Heryanto; NURHADI, Slamet. STUDI PERENCANAAN PROTOTIPE SISTEM OTOMASI METERING GARDU INDUK MENGGUNAKAN KONSEP HUMAN MACHINE INTERFACE. JURNAL ELTEK, [S.l.], v. 16, n. 1, p. 24-36, aug. 2018. ISSN 2355-0740. Available at: <https://distilat.polinema.ac.id/index.php/eltek/article/view/84>. Date accessed: 04 aug. 2021. doi: https://doi.org/10.33795/eltek.v16i1.84.
Section
Articles